Loading . . .


Laser rust removal, a form of optical device cleanup, is an Associate in nursing economical methodology for cleanup up metal parts. Using a fiber optical device cleanup system, rust and different contaminants will be quickly remove while not damaging the metal at a lower place. Visual maser rust removal value might be a pleasant varied to manual and chemical cleanup ways since rust is removed with larger truth and lower revenant costs. It’s to boot wonderful because of cutting back your environmental impact.

Laser cleanup might be a brand new style of industrial surface treatment technology. The cleanup principle refers to the use of high–energy optical device beams to irradiate the surface of the workpiece. Hence, the dirt, rust, paint, or coating on the surface of the piece of labor absorbs the optical device energy to supply instant evaporation, cracking, or sublimation, thereby realizing the workpiece’s cover clean.

Rust removal fiber optical device cleanup machine work

The principle of fiber optical device laser cleaning exploitation high-frequency and high-energy optical device pulse to irradiate the surface of the piece of labor, the coating layer can instantly absorb the targeted optical device energy, so as that the oil, optical maser cleanup machine, or coating on the surface can immediately evaporate or peel off, and effectively deduct the surface attachments at high speed Or the cleanup methodology of the surface coating, and so the optical device pulse with a short action time won’t hurt the metal substrate below the suitable parameters.

Strong special ability: Equipped with 10m-15m fiber optic cable, it’ll be applies to the diffusion of environments and venues. The simple console and operation interface can operate quickly and accurately and have superb power output, pulse parameters, and wavelength adjustment functions. Compared with totally different cleanup systems, this could cut back costs.

Cost-saving: although the value of buying the total machine for the first time might be a suitable good investment, considering the semi-permanent use and maintenance costs, optical device cleanup is the foremost appropriate choice at the instant. The value is low, that’s helpful to the company or the individual.


All materials have characteristics that define, but they react below specific conditions. For rust removal on metals, you would like to concentrate on the ablation threshold.

Laser parameters will be set so that the optical device beam’s intensity is just over. The ablation threshold of rust but below that of the metal being clean. If the ray is shone on the metal surface at an associate intensity below its ablation threshold. The beam’s energy is unfolding as heat once the rust is remove. The result’s a clean surface with rust and dirt layers volatilized whereas not permanently touching all-time low material.

The speed at that rust is remove depends on rust thickness and optical device power. Our high-octane systems deduct typical light-weight rust at around fifty cm2 sec. The thickest kinds of rust will be remove at 5 cm2/sec. The foremost effective because to verify the tiny print. For your application is to have the U.S.A. run tests on your parts.

What’s the advantage of optical device rust removal?

Environmental protection and pollution-free. Modification to the thought of property development. The method doesn’t use merchandise and chemicals that are risky to the environment, like solvents, acids, or unhealthful chemicals. Eliminate the possibility of employees being contaminate or exposed to complex materials.

Non-contact method, less harm. Watt optical device laser cleaning machine can deduct impurities from the item’s surface, not touching the underlying material, and doesn’t impose mechanical action or thermal strain on the fabric.

Leave a Reply

Your email address will not be published. Required fields are marked *

Previous post How does an Uninterruptible Power Supply (UPS) work?
Next post The Cybersecurity Advantages Of The Cloud